[Research Progress on Solidification and MICP Remediation of Soils in Heavy Metal Contaminated Site].

Heavy metal pollution in soils of smelting sites is an important environmental problem to be solved urgently. Solidification technology has become one of the mainstream technologies for heavy metal remediation in contaminated sites owing to its shorter remediation time, low cost, and high treatment efficiency. On the basis of summarizing the latest research progress on the remediation of heavy metal pollution in sites by solidification in the past 10 years, this study focused on the mechanisms of solidification technology and analyzed the advantages and disadvantages of different mechanisms (mechanism of inorganic materials, mechanism of organic materials, mechanism of mechanical ball milling, and mechanism of microbial-induced carbonate mineralization (MICP)) and their scope of application. Then, according to the research focus and development trend presented by CiteSpace, the application prospects and limiting factors of MICP technology for the solidification and remediation of heavy metal pollution in sites were summarized from three aspects:the application of MICP in multi-metal remediation, the application of MICP composites in contaminated sites, and the influencing factors of MICP technology application. Finally, the prospects and challenges in solidification technology were put forward in order to provide reference for the future development.

Neurokinin-1 receptor drives PKCɑ-AURKA/N-Myc signaling to facilitate the neuroendocrine progression of prostate cancer.

The widespread application of antiandrogen therapies has aroused a significant increase in the incidence of NEPC, a lethal form of the disease lacking efficient clinical treatments. Here we identified a cell surface receptor neurokinin-1 (NK1R) as a clinically relevant driver of treatment-related NEPC (tNEPC). NK1R expression increased in prostate cancer patients, particularly higher in metastatic prostate cancer and treatment-related NEPC, implying a relation with the progression from primary luminal adenocarcinoma toward NEPC. High NK1R level was clinically correlated with accelerated tumor recurrence and poor survival. Mechanical studies identified a regulatory element in the NK1R gene transcription ending region that was recognized by AR. AR inhibition enhanced the expression of NK1R, which mediated the PKCα-AURKA/N-Myc pathway in prostate cancer cells. Functional assays demonstrated that activation of NK1R promoted the NE transdifferentiation, cell proliferation, invasion, and enzalutamide resistance in prostate cancer cells. Targeting NK1R abrogated the NE transdifferentiation process and tumorigenicity in vitro and in vivo. These findings collectively characterized the role of NK1R in tNEPC progression and suggested NK1R as a potential therapeutic target.

Controlled Synthesis of Intermetallic Au2 Bi Nanocrystals and Au2 Bi/Bi Hetero-Nanocrystals with Promoted Electrocatalytic CO2 Reduction Properties.

The electrocatalytic properties of metal nanoparticles (NPs) strongly depend on their compositions and structures. Rational design of alloys and/or heterostructures provides additional approaches to modifying their surface geometric and electronic structures for optimized electrocatalytic performance. Here, a solution synthesis of freestanding intermetallic Au2 Bi NPs, the heterostructures of Au2 Bi/Bi hetero-NPs, and their promoted electrocatalytic CO2 reduction reaction (CO2 RR) performances were reported. It was revealed that the formation and in-situ conversion of heterogeneous seeds (e. g., Au) were of vital importance for the formation of intermetallic Au2 Bi and Au2 Bi/Bi hetero-NPs. It was also found that the Au components would act as the structure promoter moderating the binding strength for key intermediates on Bi surfaces. The alloying of Bi with Au and the formation of heterogeneous Au2 Bi/Bi interfaces would create more surface active sites with modulated electronic structures and stronger adsorption strengths for key intermediates, promoting the CO2 -to-HCOOH conversion with high activity and selectivity. This work presents a novel route for preparing intermetallic nanomaterials with modulated surface geometric/electric structures and promoting their electrocatalytic activities with alloying effects and interfacial effects. Such strategy may find wide application in catalyst design and synthesis for more electrocatalytic reactions.

Promoting the Electrocatalytic Reduction of CO2 on Ultrathin Porous Bismuth Nanosheets with Tunable Surface-Active Sites and Local pH Environments.

Electrochemical CO2 reduction reaction (CO2RR) yielding value-added chemicals provides a sustainable approach for renewable energy storage and conversion. Bismuth-based catalysts prove to be promising candidates for converting CO2 and water into formate but still suffer from poor selectivity and activity and/or sluggish kinetics. Here, we report that ultrathin porous Bi nanosheets (Bi-PNS) can be prepared through a controlled solvothermal protocol. Compared with smooth Bi nanoparticles (Bi-NPs), the ultrathin, rough, and porous Bi-PNS provide more active sites with higher intrinsic reactivities for CO2RR. Moreover, such high activity further increases the local pH in the vicinity of the catalyst surfaces during electrolysis and thus suppresses the competing hydrogen evolution reaction. As a result, the Bi-PNS exhibit significantly boosted CO2RR properties, showing a Faradaic efficiency of 95% with an effective current density of 45 mA cm-2 for formate evolution at the potential of -1.0 V versus reversible hydrogen electrode.

Metal-organic framework membranes with single-atomic centers for photocatalytic CO2 and O2 reduction.

The demand for sustainable energy has motivated the development of artificial photosynthesis. Yet the catalyst and reaction interface designs for directly fixing permanent gases (e.g. CO2, O2, N2) into liquid fuels are still challenged by slow mass transfer and sluggish catalytic kinetics at the gas-liquid-solid boundary. Here, we report that gas-permeable metal-organic framework (MOF) membranes can modify the electronic structures and catalytic properties of metal single-atoms (SAs) to promote the diffusion, activation, and reduction of gas molecules (e.g. CO2, O2) and produce liquid fuels under visible light and mild conditions. With Ir SAs as active centers, the defect-engineered MOF (e.g. activated NH2-UiO-66) particles can reduce CO2 to HCOOH with an apparent quantum efficiency (AQE) of 2.51% at 420 nm on the gas-liquid-solid reaction interface. With promoted gas diffusion at the porous gas-solid interfaces, the gas-permeable SA/MOF membranes can directly convert humid CO2 gas into HCOOH with a near-unity selectivity and a significantly increased AQE of 15.76% at 420 nm. A similar strategy can be applied to the photocatalytic O2-to-H2O2 conversions, suggesting the wide applicability of our catalyst and reaction interface designs.

Metal-Organic Framework Membranes Encapsulating Gold Nanoparticles for Direct Plasmonic Photocatalytic Nitrogen Fixation.

Photocatalytic nitrogen fixation reaction can harvest the solar energy to convert the abundant but inert N2 into NH3. Here, utilizing metal-organic framework (MOF) membranes as the ideal assembly of nanoreactors to disperse and confine gold nanoparticles (AuNPs), we realize the direct plasmonic photocatalytic nitrogen fixation under ambient conditions. Upon visible irradiation, the hot electrons generated on the AuNPs can be directly injected into the N2 molecules adsorbed on Au surfaces. Such N2 molecules can be additionally activated by the strong but evanescently localized surface plasmon resonance field, resulting in a supralinear intensity dependence of the ammonia evolution rate with much higher apparent quantum efficiency and lower apparent activation energy under stronger irradiation. Moreover, the gas-permeable Au@MOF membranes, consisting of numerous interconnected nanoreactors, can ensure the dispersity and stability of AuNPs, further facilitate the mass transfer of N2 molecules and (hydrated) protons, and boost the plasmonic photocatalytic reactions at the designed gas-membrane-solution interface. As a result, an ammonia evolution rate of 18.9 mmol gAu-1 h-1 was achieved under visible light (>400 nm, 100 mW cm-2) with an apparent quantum efficiency of 1.54% at 520 nm.

Morphology-dependent electrocatalytic nitrogen reduction on Ag triangular nanoplates.

Electrocatalytic nitrogen reduction reactions (ENRR) can produce ammonia from nitrogen and water under ambient conditions. Here, we report the morphology-dependent electro-catalytic nitrogen reduction on Ag triangular nanoplates. Boosted by potassium cations, Ag triangular nanoplates with sharp edges exhibit a high faradaic efficiency of 25% with an ammonia yield of 58.5 mg gAg-1 h-1 at a low overpotential of -0.25 V vs. RHE. In comparison, rounded Ag nanoparticles mainly enclosed by {111} and {100} surfaces show a much smaller faradaic efficiency of 16% and ammonia yield of 38 mg gAg-1 h-1 at a larger overpotential (-0.35 V vs. RHE).

Promoting photocatalytic nitrogen fixation with alkali metal cations and plasmonic nanocrystals.

Photocatalytic nitrogen fixation can produce ammonia from nitrogen and water under ambient conditions in the presence of sunlight. Here, we report that alkali metal cations (Li+, Na+, and K+) can significantly promote nitrogen activation and plasmonic nanocrystals (Au and Ag) can sensitize photocatalysts under visible light. The ammonia yield and selectivity on Au/P25 under UV-vis irradiation could be increased from 0.085 mmol g-1 h-1 and 75% to 0.43 mmol g-1 h-1 and 94.5% when promoted by K+, showing a visible-light-driven activity of 0.14 mmol g-1 h-1 and an AQE of 0.62% at 550 nm. The activity could be further increased to 1.02 (UV-vis) and 0.32 (visible) mmol g-1 h-1 with AQE of 0.93% at 550 nm with methanol added as the sacrificial agent. This strategy could be applied to a series of photocatalysts (e.g. TiO2, ZnO, and BiOBr) and may represent a general approach for designing efficient nitrogen fixation processes.

[Effect of jianpi tiaogan wenshen recipe in treating diarrhea-predominant irritable bowel syndrome].

OBJECTIVE: To verify the efficacy of Jianpi Tiaogan Wenshen Recipe (JTWR) in treating diarrhea-predominant irritable bowel syndrome (IBS-D) and to analyze its therapeutic mechanism through observing the effect of JTWR on clinical symptoms and rectal sensibility in patients. METHODS: With a prospective, randomized controlled trial adopted, 80 patients with IBS-D were assigned randomly equally and to two groups. The treatment group was treated with JTWR, and the control group was treated with pinaverium bromide tablet (PVB), all for four weeks. Patients' symptoms, such as abdominal discomfort, pain, and distension; frequency of defecation; appearance of stool; and occurrence of tenesmus were recorded before and after treatment by scoring, and the rectal sensitivity was detected as well. Patients with therapeutic effect of cured and markly effective were followed up four weeks after withdrawal of medication. RESULTS: Three cases in the treatment group and four cases in the control group were dropped. Except the appearing of mucus stool, no statistically significant difference was shown between the two group in all other symptoms, either at before or after treatment; but the end point scores of individual symptoms between pre- and post-treatment were different statistically in both groups (P<0.05). Per-protocol population set (PPS) analysis on comprehensive effect showed that the total effective rate and the cure rate in the treatment group was 81.1% (30/37) and 24.3% (9/37), and those in the control group, 80.6% (29/36) and 19.4% (7/36) respectively; while the full analysis set (FAS) showed a result of 80.0% (32/40) and 22.5% (9/40) vs 77.5% (31/40) and 17.5% (7/40) respectively, all with insignificant difference between groups (P>0.05). Follow-up study showed that relapse or aggravation of disease occurred in four cases in the treatment group and 12 in the control group respectively, showing significant difference between groups (P<0.01). Rectal sensitivity examination showed that the rectal thresholds of sensation, defecation, and maximum tolerable volume were improved in both groups after treatment (P<0.05), but showed no significant difference between groups (P>0.05). CONCLUSIONS: JTWR is effective in treating IBS-D, with the effect better than PVB in improving mucus stool, also in the remote effect. Its therapeutic mechanism is possibly by way of adjusting the sensitivity of rectum.

[Effects of Changjishu soft elastic capsule in treatment of diarrhea-predominant irritable bowel patients with liver-qi stagnation and spleen deficiency syndrome: a randomized double-blinded controlled trial].

OBJECTIVE: To evaluate the efficacy and safety of Changjishu soft elastic capsule, a new Chinese herbal medicine for smoothing liver, invigorating spleen and regulating qi activity, on diarrhea-predominant irritable bowel syndrome (D-IBS) patients with liver-qi stagnation and spleen deficiency syndrome. METHODS: A randomized, double-blinded, and positive control method was adopted. One hundred and four cases of D-IBS conforming to the inclusive criteria were randomly divided into treatment group (78 cases) and control group (26 cases). Patients in the treatment group were treated with Changjishu soft elastic capsule, four capsules once daily and three times a day. Patients in the control group were treated with glutamine compound enteric capsule, three capsules once daily and three times a day. After 21-day treatment, the efficacy of Changjishu soft elastic capsule was evaluated by the changes of single symptom such as abdominal pain or discomfort, defecation frequency, and stool characteristics. The safety of Changjishu elastic capsule was assessed by laboratory data and adverse events. RESULTS: Abdominal pain or discomfort scores at days 7, 14, 21 and the declined score at day 21 in the treatment group significantly decreased as compared with the control group (P < 0.05). Defecation frequency score at day 14 and the declined score at day 21 in the treatment group significantly decreased as compared with the control group (P < 0.05). Stool characteristics score and the declined score at day 21 in the treatment group significantly decreased as compared with those of the control group (P < 0.05). Rugitus scores and the declined scores at days 14 and 21 significantly decreased as compared with the control group (P < 0.05). The total response rates in the treatment and control groups were 71.62% and 40.91%, and the recovery rates were 20.27% and 13.64%, respectively. There existed significant differences between the two groups in therapeutic effect (P < 0.01). The therapeutic effect of Changjishu elastic capsule was better than that of glutamine compound enteric capsule. Side effects and adverse events were not found in the two groups. CONCLUSION: Changjishu soft elastic capsule is effective and safe for treatment of D-IBS patients with liver-qi stagnation and spleen deficiency syndrome.

Solid substrate-room temperature phosphorimetry for the determination of trace terbutaline sulfate based on its inhibition oxidation of rhodamine 6G by sodium periodate.

When 1.00 mol l(-1) I(-) is used as ion perturber, rhodamine 6G (Rh 6G) can emit strong and stable room temperature phosphorescence (RTP) on filter paper substrate in KHC(8)H(4)O(4)-HCl buffer solution (pH = 3.50), heated at 70 degrees C for 10 min. NaIO(4) can oxidize Rh 6G, which makes the RTP signal quench. Terbutaline sulfate (TBS) can inhibit NaIO(4) from oxidizing Rh 6G, which makes the RTP signal of Rh 6G enhance sharply. The content of TBS is linear correlation to DeltaIp of the system. Based on the facts above, a new inhibition solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace TBS has been established. The linear range of this method is 0.0104-2.08 pg spot(-1) (corresponding concentration: 0.026-5.2 ng ml(-1), with a sample volume of 0.4 microl) with a detection limit (L.D.) of 2.6 fg spot(-1) (corresponding concentration: 6.5 x 10(-12) g ml(-1)), and the regression equation of working curve is DeltaIp = 2.040 + 54.54 m(TBS) (pg spot(-1)), n = 6, correlation coefficient is 0.9994. For the samples containing 0.0104 pg spot(-1) and 2.08 pg spot(-1) TBS, the relative standard deviation (RSD) are 3.8% and 2.3% (n = 8), respectively, indicating good precision. This method has been applied to determination of trace TBS in the practical samples with satisfactory results. The reaction mechanism of NaIO(4) oxidizing Rh 6G to inhibit SS-RTP for the determination of trace TBS is also discussed.

Determination of trace lead by solid substrate room temperature phosphorescence enhancing method based on heavy atom effect and dissoluble manganese supramolecule containing rhodamine 6G luminescent particles.

Dissoluble manganese supramolecule containing rhodamine 6G luminescent particles (M2) are synthesized, based on dissoluble manganese supramolecule (M1) doping rhodamine 6G (R.6G), by crystalline method. The particle diameters of M1 and M2 determined by ETM are both of micron degree. M1 and M2 can emit solid substrate room temperature phosphorescence (SS-RTP) on filter paper. The transition probability from the singlet state (S1) to triplet state (T1) of the luminescent molecules was greatly enhanced, based on the increment of luminescent molecules for each spot and the heavy atom effect of certain amount of Pb2+. As a result, the phosphorescence intensity (Ip) of M2 was increased sharply, and the enhancing value of phosphorescence intensity (DeltaIp) is directly proportional to the concentration of Pb2+. Thus, a new method of SS-RTP enhancing for the determination of trace lead is established based on manganese supramolecule containing rhodamine 6G luminescent particles. The linear range of this method is 0.0040-0.400 pg spot-1 of Pb2+ (corresponding concentration, 0.01-1.0 ng mL-1; sample volume, 0.4 microL spot-1), with a detection limit (LD) of 0.0011 pg spot-1 (corresponding concentration, 2.8x10(-12) g mL-1 of Pb2+, n=11). For the working solutions containing 0.0040 and 0.40 ng mL-1 of Pb2+, they were determined repeatedly for seven times, respectively. The R.S.D.s were 3.2 and 3.8%, respectively. This method has good repeatability, sensitivity and high precision. It has been applied to the determination of trace lead in human hair and tea samples with satisfactory results.